PIC18Fxxx Instruction Set
Byte-oriented File Register Operations
- ADDWF — Add WREG to f
- ADDWFC — Add WREG and Carry bit to f
- ANDWF — AND WREG with f
- CLRF — Clear f
- COMF — Complement f
- CPFSEQ — Compare f with WREG, skip =
- CPFSGT — Compare f with WREG, skip if >
- CPFSLT — Compare f with WREG, skip if <
- DECF — Decrement f
- DECFSZ — Decrement f, Skip if 0
- DCFSNZ — Decrement f, Skip if Not 0
- INCF — Increment f
- INCFSZ — Increment f, Skip if 0
- INFSNZ — Increment f, Skip if Not 0
- IORWF — Inclusive OR WREG with f
- MOVF — Move f
- MOVFF — Move fs (source) to fd (destination)
- MOVWF — Move WREG to f
- MULWF — Multiply WREG with f
- NEGF — Negate f
- RLCF — Rotate Left f through Carry
- RLNCF — Rotate Left f (No Carry)
- RRCF — Rotate Right f through Carry
- RRNCF — Rotate Right f (No Carry)
- SETF — Set f
- SUBFWB — Subtract f from WREG with borrow
- SUBWF — Subtract WREG from f
- SUBWFB — Subtract WREG from f with borrow
- SWAPF — Swap nibbles in f
- TSTFSZ — Test f, skip if 0
- XORWF — Exclusive OR WREG with f
Bit-oriented File Register Operations
- BCF — Bit Clear f
- BSF — Bit Set f
- BTFSC — Bit Test f, Skip if Clear
- BTFSS — Bit Test f, Skip if Set
- BTG — Bit Toggle f
Control Operations
- BC — Branch if Carry
- BN — Branch if Negative
- BNC — Branch if Not Carry
- BNN — Branch if Not Negative
- BNOV — Branch if Not Overflow
- BNZ — Branch if Not Zero
- BOV — Branch if Overflow
- BRA — Branch Unconditionally
- BZ — Branch if Zero
- CALL — Call subroutine
- CLRWDT — Clear Watchdog Timer
- DAW — Decimal Adjust WREG
- GOTO — Go to address
- NOP — No Operation
- POP — Pop top of return stack (TOS)
- PUSH — Push top of return stack (TOS)
- RCALL — Relative Call
- RESET — Software device RESET
- RETFIE — Return from interrupt enable
- RETLW — Return with literal in WREG
- RETURN — Return from Subroutine
- SLEEP — Go into Standby mode
Literal Operations
- ADDLW — Add literal and WREG
- ANDLW — AND literal with WREG
- IORLW — Inclusive OR literal with WREG
- LFSR — Move literal to FSRx
- MOVLB — Move literal to BSR<3:0>
- MOVLW — Move literal to WREG
- MULLW — Multiply literal with WREG
- RETLW — Return with literal in WREG
- SUBLW — Subtract WREG from literal
- XORLW — Exclusive OR literal with WREG
Data Memory & Program Memory Operations
- TBLRD* — Table Read
- TBLRD*+ — Table Read with post-increment
- TBLRD*- — Table Read with post-decrement
- TBLRD+* — Table Read with pre-increment
- TBLWT* — Table Write
- TBLWT*+ — Table Write with post-increment
- TBLWT*- — Table Write with post-decrement
- TBLWT+* — Table Write with pre-increment
更多精彩
